We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
z_thermal_adjust
Temperature reading from z_thermal_adjust is shown in fluidd UI, but it is not shown in the KlipperScreen.
Temperature reading from z_thermal_adjust should be shown in the KlipperScreen.
You need to set z_thermal_adjust. For example, I am using
[z_thermal_adjust] sensor_type: Generic 3950 sensor_pin: PF5 min_temp: -30 max_temp: 300 temp_coeff: 0.012 z_adjust_off_above: 1
No response
KlipperScreen.tar.gz
Attached.
The text was updated successfully, but these errors were encountered:
i'll remove the bug label since this is in reality an FR, since this was never added to the UI
bug
Sorry, something went wrong.
No branches or pull requests
What happened?
Temperature reading from
z_thermal_adjust
is shown in fluidd UI, but it is not shown in the KlipperScreen.What did you expect to happen instead?
Temperature reading from
z_thermal_adjust
should be shown in the KlipperScreen.How to reproduce this bug?
You need to set
z_thermal_adjust
. For example, I am usingAdditional information:
No response
Log output
KlipperScreen.tar.gz
The text was updated successfully, but these errors were encountered: