Secondary WAN incorrect status [Bug]

[kamilnadzieja]

The problem

Hi,

I'm using Asus RT-AX88U with Dual Wan enabled (second wan is via usb lte dongle). As you can see in the screenshot below entity "Secondary WAN" is set as "Connected" although it is not in reality (look at the secondary WAN IP):

On the router configuration page the status of the secondary wan is "Cold - Standby":

Question - is it possible to get the value "Disconnected" in this integration given the fact that secondary wan is actually disconnected?

Thanks!

Your device model

RT-AX88U

Firmware type

Merlin

Firmware version

3004.388.7

Integration version with the issue

0.31

Method of the integration installation

HACS

What version and type of Home Assistant installation do you use

Core 2024.5.3

Is there anything useful in the logs?

No response

Diagnostics information

No response

Additional information

No response

[Vaskivskyi]

Can you please show what does the attribute link look like? Unfortunately, I don't have LTE dongles, but when tested with phone and tethering, it works as expected. Might be, USB modems report differently

[kamilnadzieja]

Here:

EDIT: Ok, I have restarted the router and it magically jumped to "Disconnected". Reloaded the integration - same magic has happened. I will leave this defect open and observe the behavior for a few days - if this was just a glitch then I will close it.