wlsunset 0.4.0 unable to adjust gamma on wayfire 0.8.1

[je-vv]

Describe the bug

When running wayfire 0.8.1 and wlsunset 0.4.0, wlsunset is no longer able to adjust the screen gamma.

Doing:

killall wlsunset && wlsunset &

With wayfire running as:

WAYLAND_DEBUG=1 wayfire

Produces the output:

[2338848.869]  -> wl_display@1.get_registry(new id wl_registry@2)
[2338848.875]  -> wl_display@1.sync(new id wl_callback@3)
[2338849.181] wl_display@1.delete_id(3)
[2338849.189] wl_registry@2.global(1, "wl_shm", 1)
[2338849.193] wl_registry@2.global(2, "wl_drm", 2)
[2338849.197] wl_registry@2.global(3, "zwp_linux_dmabuf_v1", 4)
[2338849.200] wl_registry@2.global(4, "wl_compositor", 6)
[2338849.203] wl_registry@2.global(5, "wl_subcompositor", 1)
[2338849.206] wl_registry@2.global(6, "wl_data_device_manager", 3)
[2338849.210] wl_registry@2.global(7, "zwp_primary_selection_device_manager_v1", 1)
[2338849.213] wl_registry@2.global(8, "zwlr_data_control_manager_v1", 2)
[2338849.216] wl_registry@2.global(9, "zwlr_output_manager_v1", 4)
[2338849.219] wl_registry@2.global(10, "zwlr_output_power_manager_v1", 1)
[2338849.224] wl_registry@2.global(11, "xdg_wm_base", 3)
[2338849.227] wl_registry@2.global(12, "zwlr_layer_shell_v1", 4)
[2338849.230] wl_registry@2.global(13, "xwayland_shell_v1", 1)
[2338849.233] wl_registry@2.global(14, "zwp_tablet_manager_v2", 1)
[2338849.235] wl_registry@2.global(15, "wl_seat", 8)
[2338849.238] wl_registry@2.global(16, "zwlr_screencopy_manager_v1", 3)
[2338849.241] wl_registry@2.global(17, "zwlr_gamma_control_manager_v1", 1)
[2338849.245]  -> wl_registry@2.bind(17, "zwlr_gamma_control_manager_v1", 1, new id [unknown]@4)
[2338849.248] wl_registry@2.global(18, "zwlr_export_dmabuf_manager_v1", 1)
[2338849.251] wl_registry@2.global(19, "zxdg_output_manager_v1", 3)
[2338849.254] wl_registry@2.global(20, "wp_drm_lease_device_v1", 1)
[2338849.257] wl_registry@2.global(21, "zwlr_input_inhibit_manager_v1", 1)
[2338849.260] wl_registry@2.global(22, "ext_idle_notifier_v1", 1)
[2338849.263] wl_registry@2.global(23, "zwp_idle_inhibit_manager_v1", 1)
[2338849.265] wl_registry@2.global(24, "org_kde_kwin_server_decoration_manager", 1)
[2338849.269] wl_registry@2.global(25, "zxdg_decoration_manager_v1", 1)
[2338849.273] wl_registry@2.global(26, "zwp_virtual_keyboard_manager_v1", 1)
[2338849.276] wl_registry@2.global(27, "zwlr_virtual_pointer_manager_v1", 2)
[2338849.278] wl_registry@2.global(28, "zwp_pointer_gestures_v1", 3)
[2338849.281] wl_registry@2.global(29, "zwp_relative_pointer_manager_v1", 1)
[2338849.284] wl_registry@2.global(30, "zwp_pointer_constraints_v1", 1)
[2338849.287] wl_registry@2.global(31, "wp_presentation", 1)
[2338849.290] wl_registry@2.global(32, "wp_viewporter", 1)
[2338849.293] wl_registry@2.global(33, "zxdg_exporter_v1", 1)
[2338849.296] wl_registry@2.global(34, "zxdg_importer_v1", 1)
[2338849.299] wl_registry@2.global(35, "zxdg_exporter_v2", 1)
[2338849.301] wl_registry@2.global(36, "zxdg_importer_v2", 1)
[2338849.304] wl_registry@2.global(37, "wp_fractional_scale_manager_v1", 1)
[2338849.307] wl_registry@2.global(38, "wp_single_pixel_buffer_manager_v1", 1)
[2338849.310] wl_registry@2.global(40, "wl_output", 4)
registry: adding output 40
[2338849.315]  -> wl_registry@2.bind(40, "wl_output", 4, new id [unknown]@5)
[2338849.318] wl_registry@2.global(41, "zwlr_foreign_toplevel_manager_v1", 3)
[2338849.321] wl_registry@2.global(42, "gtk_shell1", 3)
[2338849.324] wl_registry@2.global(43, "zwp_keyboard_shortcuts_inhibit_manager_v1", 1)
[2338849.327] wl_registry@2.global(44, "zwf_shell_manager_v2", 2)
[2338849.329] wl_callback@3.done(500)
[2338849.332]  -> zwlr_gamma_control_manager_v1@4.get_gamma_control(new id zwlr_gamma_control_v1@3, wl_output@5)
[2338849.335]  -> wl_display@1.sync(new id wl_callback@6)
[2338849.413] wl_display@1.delete_id(6)
[2338849.418] wl_output@5.geometry(0, 0, 530, 300, 0, "HP Inc.", "HP V24i", 0)
[2338849.422] wl_output@5.mode(1, 1920, 1080, 60000)
[2338849.425] wl_output@5.scale(2)
[2338849.427] wl_output@5.name("HDMI-A-3")
[2338849.429] wl_output@5.description("HP Inc. HP V24i 1CR20308TZ (HDMI-A-3)")
[2338849.431] wl_output@5.done()
[2338849.432] zwlr_gamma_control_v1@3.gamma_size(1024)
[2338849.456] wl_callback@6.done(500)
calculated sun trajectory: midnight sun
setting temperature to 6500 K
[2338849.554]  -> zwlr_gamma_control_v1@3.set_gamma(fd 7)

But the gamma never get to change, :(

Is there anything else you might need, that I can share?

To Reproduce

Use wlsunset 0.4.0 and wayfire 0.8.1 (latest release) and you'll notice no gamma adjusting happens at all.

Expected behavior

Gamma correction should happen, I should see less blue (a bit higher temp / more red).

Screenshots or stacktrace

N/A

Wayfire version

wayfire 0.8.1
wlsunset 0.4.0

[je-vv]

BTW, I can't remember when this started happening. I recall gama adjusting with wlsunset was working fine.

[ammen99]

I have unfortunately had some issues like this where I had to restart my computer :) (it was a driver bug probably)

Unfortunately it works here for me so it is hard to say what is going on, maybe try looking at Wayfire's log (stdout), I'd expect a wlroots error potentially.

[je-vv]

A full output when wayfire is running with WAYLAND_DEBUG=1 is available on the gist:

https://gist.github.com/je-vv/d5f88397ca09b996e39e55ee78f8cd6e

I don't see something in the log that helps me, but I understand little about that output any ways...

As mentioned, it was working just fine. Not sure what broke, neither when, :( Restarting the computer doesn't help...

[ammen99]

As mentioned, it was working just fine. Not sure what broke, neither when, :( Restarting the computer doesn't help...

:(

Any chance of trying another compositor with the same wlroots version, so that we can try tracking down where the bug is happening?

[je-vv]

ohh, I'll see if I can on the weekend. I'm not familiar with tiling, so there are no many options, there's labwc, which I never tried since I don't like the openbox xml config and it's using wlroots0.17, same as wayfire...

I'll see what I can do...

[ammen99]

I'm not familiar with tiling, so there are no many options

You don't need to do much, just open sway & a terminal and type your wl-sunset command. But ofc feel free to try labwc as well, it doesn't matter, the point is to check whether wayfire or wlroots or some component in the kernel is the issue.

I guess you could also try updating wayfire to -git and wlroots to latest release (0.17.2, idk which version you are on), but I don't think there have been any bug fixes so I doubt this will fix the issue, but who knows ..