We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Hey!
I use an T-ETH-LITE board and i try to use the digital pin 38 as an output.
The sketch compiles ok, but when the program is running i get the following error: "E (49528) gpio: gpio_set_level(226): GPIO output gpio_num error"
I get the same error using the pins: 34, 35, 38, 39. I don't get the error using other pins.
Software used: Arduino IDE 2.2.1, board manager esp32 by Espressif 2.0.11
Can someone help me with a fix on using pin 38 , because the board is done and i can not change the pin.
Thanks!
The text was updated successfully, but these errors were encountered:
Aren't those pins input-only on an ESP32?
https://docs.espressif.com/projects/esp-faq/en/latest/software-framework/peripherals/gpio.html
Sorry, something went wrong.
:( i guess so ... Thank you!
This issue is stale because it has been open for 30 days with no activity.
This issue was closed because it has been inactive for 14 days since being marked as stale.
No branches or pull requests
Hey!
I use an T-ETH-LITE board and i try to use the digital pin 38 as an output.
The sketch compiles ok, but when the program is running i get the following error:
"E (49528) gpio: gpio_set_level(226): GPIO output gpio_num error"
I get the same error using the pins: 34, 35, 38, 39.
I don't get the error using other pins.
Software used: Arduino IDE 2.2.1, board manager esp32 by Espressif 2.0.11
Can someone help me with a fix on using pin 38 , because the board is done and i can not change the pin.
Thanks!
The text was updated successfully, but these errors were encountered: