-
Notifications
You must be signed in to change notification settings - Fork 803
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
TECO recieved but sended copy is not read in target device #1950
Comments
Have this worked before? |
I worked with nec, lg and also exported with some kind of protocol, not an exporter. The same code is executed using the console, by the value of the log line in littlefs (value, decode_type, bits) and by the trigger mqtt or http is called via send. It works right now with nec and lg, but does not work with teco, although the receiver always recognizes it perfectly, it turns out that this remote is teco. |
I've reviewed the library code, and I can't see anything obvious that could cause a problem. |
Ok, im dump remote in 2-3 days |
How did you go? |
No time now, trouble with health. Need many time for this, sorry. Maybe, end of this week. |
Version/revision of the library used
v2.8.4 from Library Manager in Arduino IDE 1.8.19
ESP8285 (ESP-M3) and recieve / send modules and IR-diodes with mosfet.
nonos-sdk-2.2.1 +100 (190703)
This problem only at TECO protocol, NEC and LG worked perfecly.
This is my universal IR center with http, mqtt and IR control: https://github.com/whoim2/esp-ir-center-and-relays
Describe the bug
Readed string from IR remote / climat device: 25060053C, TECO, 35 bits.
Send this code:
Result from serial debug:
Diodes flashed in camera view. Device ("Besshof" climat separated device) not view this code, not beep as original ir-remote.
To Reproduce
Read TECO data from IR-remote and send copy of this code.
The text was updated successfully, but these errors were encountered: