Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Add support for UX533FN/RX533FN (A8059T) #155

Open
Yesjo2k opened this issue May 16, 2024 · 2 comments
Open

Add support for UX533FN/RX533FN (A8059T) #155

Yesjo2k opened this issue May 16, 2024 · 2 comments
Assignees
Labels
add new device Add support for new device

Comments

@Yesjo2k
Copy link

Yesjo2k commented May 16, 2024

Environment
afc version: 3.15 (latest)
image

Config info
image

(i ran this command after the former image)
image

It does not work
The fan doesn't move unfortunately (as to be seen in the screenshot). any clues as to why?

Notable is the output for get-temps which just seems to increase by 1 starting from 55.

I am going to check on the fan to see if it still even works as my laptop was repaired (the hinges were repaired). I will come back to this later when I have opened my laptop later today (currently in the library). I don't think the fan ever worked since I installed linux about ~10 months ago, but it might also just be bricked.

If I go to UEFI BIOS i can't find anything about the cpu fan. Have checked the schematic for this laptop, (altho in low quality), it has PWM.

Have tried cooler control too, that didn't work either and I couldn't set the fan speed anywhere. Could only see temps and my fan speed (0).

Would be interested in what you guys have to say!

PS
sorry if this is a bad issue, i am new to this stuff

@Yesjo2k Yesjo2k added the add new device Add support for new device label May 16, 2024
@Yesjo2k
Copy link
Author

Yesjo2k commented May 16, 2024

checked the fan and it's fine!
edit: the fan is not bricked (i checked with multimeter), but it just doesn't work/move.

@Yesjo2k
Copy link
Author

Yesjo2k commented May 24, 2024

bump

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
add new device Add support for new device
Projects
None yet
Development

No branches or pull requests

2 participants