Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more

A code for Adafruit esp32-s2 (built-in tft display) that measure temp and humd from DHT22 sensor and shows on display with the batt %. Also send the data each minute to mqtt server. Working with 'rsp-server'.

Expose GPIO modules (Raspberry Pi, Beaglebone, PCF8754, PiFace2 etc.) and digital sensors (LM75 etc.) to an MQTT server for remote control and monitoring.

Tracks temperature and humidity readings and graphs the results in a web dashboard

Support for Adafruit DHT temperature and humidity sensor

An tiny ultra low power thermo-hygro sensor made with a DHT22 sensor and ESP8266 micro-controller. It collects data for temperature and humidity. Extremely optimized for running on a 18650 Li-ion battery for more than 5 months without recharge.

Docker container for the DHT11/DHT22/AM2302 sensors, able to relay sensor readings to a MQTT broker. Integrates with HomeAssistants' discovery protocol and incorporates a robust outlier detection scheme. All features are configurable, where the container can be used to simply log data too.

Ein Pflanzensensor der Bodenfeuchte, Luftfeuchte, Lufttemperatur und Lichtstärke misst und dir über sein Display oder eine Telegram-Nachricht Bescheid gibt, wenn deine Pflanze dich braucht❣️

Interfacing DHT Sensor with ESP Microcontroller and Display result on Node-RED.

Automate and enhance your clothesline experience with this Arduino-based system. It automates the retraction process triggered by rain detection, protecting clothes during inclement weather. The system offers remote data monitoring via Thingspeak and convenient control through a mobile app.

Displaying Temperature, Humidity and Flame on Firebase RTDB using ESP.

simple node.js project which uses dht sensor on raspberry pi to show the temprature and humidity of the room

Mini Proyecto pre-TPP de Pablo Hsieh

A MicroPython application written for an ESP32 microcontroller, used for reading environmental data from DHT22, BME280, ENS160, or PMS5003 sensors, and sending the results as JSON to an MQTT topic.

A prometheus exporter for dht22 sensor data

Une compilation des codes pour les cartes Arduino

Raspberry Pi IoT monitoring application.

golang dht22 sensor reader

A library for simple and easy reading of DHT11/DHT22 sensors

Smart Medibox is pharmaceutical storage solution integrating hardware components like OLED screens, buzzers, and sensors with advanced software functionalities for efficient medication management.