Maker's Pet Snoopy - a 300mm 3D-printed DIY pet robot compatible with Kaia.ai robotics software platform

Maker's Pet Loki - a 200mm 3D-printed DIY pet robot compatible with Kaia.ai robotics software platform

Wordclock with an Arduino ESP32 Nano. Built your own word clock with one or four languages with an Arduino ESP32 Nano. You can control it with your phone of with a web page. Software updates can be uploaded with OTA (Over the Air). It will keep its time within the second correct with the internet NTP time and a time zone selection.

General Purpose Things eXperiment - dynamically loading and executing binaries while running a Sketch on esp32.

Bresser 868 MHz Weather Sensor Radio Receiver based on ESP32/RP2040 and SX1262/SX1276 - sends data to a LoRaWAN Network

Alternative firmware for Airgradient DIY sensor

Arduino project (software part, not a specific hardware layout) for ESP32 and ESP8266 modules. Turns a simple load ON and OFF according to commands received over UART (by cable), Wi-FI (TCP, HTTP) and Bluetooth Classic.

Repositorio para materia Temas Selectos de Electrónica e Instrumentación I (Sistemas Embebidos en nube AWS) e Introducción a IoT

OCPP 1.6 client for microcontrollers

Traning for climbing. Load cell with HX711 and real time plotting,

This is intended for displaying camera feed and FOMO(object detection model) results to TFT for Esp32-S3

Bresser 5-in-1/6-in-1/7-in-1 868 MHz Weather Sensor Radio Receiver for Arduino based on CC1101, SX1276/RFM95W or SX1262

References Sketches for HomeSpan Devices

A system that uses ESP-NOW, LoRa, and other protocols to transport sensor data in remote areas without relying on WiFi.

IOT ESP32 code for monitoring ammonia (NH3) using MQ135 sensor and Servo in biofloc fish pond

Async MQTT 3.1.1 & 5.0 Client for Arduino ESP32 & ESP8266

A Wi-Fi penetration testing tool for ESP8266 and ESP-32

This driver library offers a simple access to data transfer using the cc1101 module. It gives access to many configuration options without need to use RFStudio.

Serial logger for Arduino or ESP32, pretty much just like Arduino Serial Monitor, but you wont see anything in the terminal but it allows to store a file. just for linux

RFID machine access solution for a Fab Lab, based on ESP32. Uses modern C++ with Arduino framework. Hardware project is included.