Record and play back sessions on a DNA device.

A Teensy-based MIDI controller project featuring 10 potentiometers for real-time music and video manipulation and production.

Flight Logging And REcovery - UBC Rocket Competition Avionics Firmware

Flexible logging library for the Arduino SDK, allowing the same logging interface to be used with multiple outputs.

Fast and Lean Sqlite database logger for Arduino UNO and above

A full-featured DMX library for Teensy 3, Teensy LC, and Teensy 4. "Programmable DMX and arbitrary USB serial device emulation."

Reverse Engineering Framework for the Polyend Tracker

Library to configure WiFi/Credentials at runtime for Teensy, SAM DUE, STM32F/L/H/G/WB/MP1, SAMD21/SAMD51, RP2040-based boards, etc. using WizFi360 /ESP8266 /ESP32-AT-command shields. You can also specify static AP and STA IP.

This library enables you to use ISR-based PWM channels on Teensy boards, such as Teensy 2.x, Teensy LC, Teensy 3.x, Teensy 4.x, Teensy MicroMod, etc., to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The mo…

This library enables you to use Interrupt from Hardware Timers on an Teensy-based board such as Teensy 4.x, 3.x, LC, 2.0, etc. These Teensy Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using mill…

Python3 server to communicate to lightwall

Experimental code for bluetooth-controlled light wall using NeoPixels/NeoMatrix

Test sketches and information to use the improved USFSMAX Module with MMC5983 magnetometer

Example host MCU sketch to demonstrate use of the USFSMAX coprocessor

Enable Blynk support of Teensy boards, especially latest Teensy 4.0, using WiFi, Ethernet, BT/BLE and GSM/GPRS shield

This is the library, designed to help you eliminate hardcoding your Blynk credentials in Mega 1280, Mega 2560, Mega ADK, Teensy, SAM DUE, SAMD, RP2040-based, etc. boards using with Ethernet shields (W5100, W5200, W5500, ENC28J60, etc).

MapMyAir is a proof of concept system to visualize and predict air quality in your local neighborhood. MapMyAir uses the LoRaWAN(proprietary low-power wide-area network) to collect air quality metrics with custom hardware. The custom hardware is moved around your local area and collects data about the air. The collected data is formatted and for…

Maintained fork of https://sourceforge.net/p/teensy-3-x-rammonitor

An easy starting point for Teensy 3.6 projects on windows

teensy midi loop recorder