Supported / Unsupported ISOs #7
Comments
|
Ventoy 1.0.05 release.
|
|
With Ventoy 1.0.06
|
|
Thank you very much for adding new ISOs and features. |
|
Can you add the exactly iso file size and test environment information? Then I can directly add them to the tested iso list on Ventoy website. |
|
Of course , Added. Aporteus which is Arch Linux based version of Porteus , is best , fastest and greatest distro i ever met , it's fully modular , supports bleeding edge techs like zstd , have a tool to very easily compile and use latest version of released or RC kernel directly from kernel.org ( Kernel Builder ) , have a tool to generate daily fresh ISO so all the packages are daily and fresh ( Aporteus ISO Builder ) , you can have multi desktops on a ISO and on boot select whatever you like , it has naturally Copy to RAM feature with flag to copy specific modules only so linux run at huge speed , a lot of tools and softwares along side mini size ISO , and it use very very low ram and ISO size, You can generate ISO with whatever language you like to distro have. https://forum.porteus.org/viewtopic.php?t=4997 if it's possible please add UEFI support for this great distro. |
|
For me I'm missing Hiren's Boot CD (https://www.hirensbootcd.org/) - it's WindowsPE based and supports UEFI from USB. I tested it but trying to boot it will fail with an I/O error. Would be nice if this could be supported in the future as well. |
|
@chromer030 hello.
|
|
@FadeMind
|
I will tested soon lastest ISO then 🔥 |
|
@FadeMind |
|
Laptop based platform: |
|
@chromer030 Your favorite, APorteus was done with legacy & UEFI So let's expecting the next release! |
Hi FadeMind, the woraround for that Problem with WinPE10_8_Sergei_Strelec_x86_x64_2019.12.28_English.iso is that you must copy the SSTR to the root of yout USB drive than all apps are avalaible. |
Hi MFlisar , if you want use that now with HBCD you must extract the iso but the ventoy.dat on the root of the iso recreate the iso with example: ntlite oder oder tools and than you are able to boot from. |
|
if you want can you test this too :) best regards |
|
@blackcrack |
|
Hi, HDClone 9.0.11 ISO is stating on UEFI succesfully but on Legacy after choose "s" or "x64" to start hdclone it open's a black windows in front of the Ventoy Menu and noting happens more. Must hardreset the System. |
|
*lil' bow* best regards |
Hi, HDClone can be booted by Ventoy in Memdisk mode for legacy BIOS, you try Ventoy 1.0.08 beta2. For memdisk mode see Notes |
@
Hi, Hiren's Boot CD can be booted by Ventoy in Memdisk mode, you try Ventoy 1.0.08 beta2. For memdisk mode see Notes |
Hi, thanks for your repley boot i have same error after menu to start hdclone he's go back to the menu with a black windows saying he's loading the iso file to mem and that it freez. |
|
Acronis True Image 2020 24.6.1 Build 25700 in Legacy is working in Memdisk mode on 1.0.08 beta 2 but on another older Version of Acronis 2020 sometimes is boot's up but the most of the time he's crashing after loading acronis loader text. |
|
On one of my Laptop Problem with HBCD_PE_x64.iso Uefi on start from Desktop error with Autoit v3: Pintool.exe Application error. That error i have also with WinPE 10 Sergei is booting with that error ( on Skylake Processor). On my other Laptop from other Manufacturer is booting without error. (Haswell Processor) Tested in Memdisk and normal mode with 1.0.08b2 |
Thank you very much, will test this |
|
Tested below ISOs on HP ENVY x360- 13-ag0007au (1st-gen Ryzen Mobile convertible laptop, BIOS F.46 Rev.A) with Ventoy 1.0.08 final release in UEFI secure boot mode:
Nice job and thanks a lot for this neat tool! |
|
FreeNAS-11.3-U2.1.iso (FreeBSD based) tested using ventoy-1.0.08 hung during boot in both bios and uefi at the following error; da1: Attempt to query device size failed: NOT READY, Medium not present testing on a NUC7i5BNK |
|
Using Ventoy-1.0.08, ubuntudde-20.04-amd64-desktop.iso is still unable to boot under uefi. |
|
Something about secure boot? try 1.0.09 beta1? |
Same issue with 1.0.09b1. It says that no bootfile found for uefi. I've already disabled secure boot. |
|
slax-64bit-11.6.O.iso downloaded from https://slax.org |
|
Ventoy 1.0.94 I think that would be useful to mention on this page: https://www.ventoy.net/en/distro_iso/memtest86+.html |
|
NetBSD 9.3 failed to boot on UEFI system |
|
I can confirm Nix working. (Not in the list) |
Same for FreeBSD |
|
Was there a recent breaking change? As I remember KaOS and FreeBSD booting. |
|
I've been seeing erratic behavior with booting Windows ISOs in Legacy mode with an ASUS STRIX B250F Gaming + Intel Celeron G3930. The screen would show black for a few seconds, then "freeze" at the last menu. Though Windows 7 shows garbage. Linux ISOs work fine
Those were with a USB port in the back. For giggles, I tried most of the bad ones in the front. That didn't help much.
I then tried them all in UEFI mode and they all worked fine
To be fully transparent, WDO_Media64.iso showed a message that said something like "bootx64.efi not found", but at least it didn't freeze like everything else did This seems to be specific to this motherboard. At the very least, Windows 10 worked fine on a different motherboard. |
|
Memtest86+ version 6.20 (AA76769AC297BD923DE23F6B46E2C74338912D027EF858F0A3E5E0C820635753) doesn't work on Legacy mode. On an ASRock Z170 Extreme3, it boots to my main drive. On an ASUS STRIX B250F Gaming, it causes a reboot |
|
Try all usb ports and try usb2 cable. |
|
With those tests, the first time around was with a USB 3.0. The second test was with...well... I don't know if it's a 1.1 or a 2.0, but definitely not a 3.0 port. Also, every time it froze, I did a hard shutdown. That didn't seem to help with Windows 10 64, at the very least |
This seems like a typical issue with the BIOS fallback modes. Never trust these two to boot ISOs reliable. You can try to update your UEFI. |
|
r2fuj36wd.iso, Lenovo BIOS Update (Utility & Bootable CD) for Windows 11, 10 (64-bit) - ThinkPad T14 Gen 4, P14s Gen 4, T16 Gen 2, P16s Gen 2, doesn't boot in either normal or memdisk mode, have tried on T14 Gen 4 and T16 Gen 2. https://download.lenovo.com/pccbbs/mobiles/r2fuj36wd.iso . Also secure boot doesn't work, but even after disabling it the ISO still hangs with a cursor ( _ ) on the screen. Burning the ISO to a CD and booting from a USB optical drive works. |
|
SteamOS: Steam Deck Image dont load |
|
This looks like a defective ISO to me. Did you try to load it in Virtualbox or something? |
|
Slackware 14.2 and 15.0 support? |
|
@Dazmed707, what do you mean by your question marks:
|
Slackware is supported by Ventoy (I've tested it on UEFI). |
Did you get any luck running the SPP though ventoy? If not, how did you end up doing it? |
|
Proxmox VE 8.1 doesn't boot in UEFI mode via Ventoy Testing platform: HP Elitedesk 800 G2 SFF with i5 6500, secure boot disabled. |
|
HPE Intelligent Provisioning Recovery Media for Gen10 and Gen10 Plus - Version: 3.88 (4 Sep 2023) (i verified that the checksum of the ISO file is correct, matches the one from the HPE page). Booting Ventoy (version 1.0.97 release) on a HPE ProLiant DL380 Gen10, (UEFI boot mode but with secure boot disabled) and then choosing the ISO file for intelligent provisioning firmware update causes a kernel panic in the HPE installer after showing a ramdisk checksum error for a few seconds. The kernel panic error message is pretty much the same one as the one for the SPP (Service Pack for ProLiant) in the screenshot above - unable to mount filesystem - HPE is using the same general boot infrastructure for both the SPP and the Intelligent Provisioning. i wiped the USB drive and used the bootable USB utility from HPE (included in the same ISO image) to create the bootable USB on the same usb device, This one with the HPE boot loader worked without issue. |
|
Did you try the grub2 boot option? That option works for me. |
|
nope. did not try that (i have not used Ventoy much... ), For me it was faster to just wipe the USB drive and make a dedicated boot USB that i knew that would work. |
|
Well why waste time raising an issue if you don't know how to use the software, don't read the docs and don't test it properly? |
|
To raise awareness to the developer, who is always grateful for any help. 😃 |
|
KaOS lost support with the recent ISO. https://mirror.234.cz/kaos/KaOS-2024.03-x86_64.iso |
The latest CI release should have fixed this. |
Try grub2 mode. |
|
edited 09-05-2024 The app must change the name to "Amazo" because it is amazing.
I was not able to boot these exotic OS's
|
|
I notice that Daphile 20.08 and 21.01 are listed in https://www.ventoy.net/en/distro_iso/daphile.html But Daphile 23.03 lost support. See #2802 for more info. |
and others
Hey, here is results of testing OSs via Ventoy , based on Distrowatch and https://www.ventoy.net/en/isolist.html , using released version of Ventoy in testing time.
NOTE : Any "Install macOS ..." created bootable .dmg's (which are just .img files) , ISO or RAW , don't currently boot on Macs (through ventoy) due to how their bootloaders are setup compared to normal UEFI bootloaders.
Please report your tested unlisted supported or unsupported one/s here , thanks
Testing Platforms :
Media not found... waiting for new devices.Press any key to boot from CD/DVD...returns to Ventoy.file /live/vmlinuz not found, this distro is based on Resilient Linux./dev/src0 no medium foundThe text was updated successfully, but these errors were encountered: