Skip to content

i2c-tools like utilities to work with devices under I2C busses behind BMC

License

Notifications You must be signed in to change notification settings

Kostr/i2c_over_ipmi

Repository files navigation

Set of utilities to work with the devices under I2C busses of the BMC controller from the main CPU:

CPU <---------> BMC ----- I2C0
    inband ipmi      |
    (KCS/BT/...)     ---- I2C1
                     |
                     ...
                     |
                     ---- I2C7

The repository includes these utilities:

  • i2cdump_over_ipmi
  • i2cget_over_ipmi
  • i2cset_over_ipmi

They naming mimics standard utilities from the i2c-tools package.

The communication is based on the IPMI command Master Write-Read:

ipmi1.png

Its description can be found in the IPMI specification:

ipmi2.png

Off course this means that for this program the BIOS<-->BMC communication should be working (for example via KCS interface) and the BMC controller should implement this IPMI operation in its IPMI stack.

phosphor-ipmi-host application from the OpenBMC project implements this command, but you need to provide a proper whitelist file master_write_read_white_list.json or disable whitelist functionality:

https://github.com/openbmc/phosphor-host-ipmid/blob/master/apphandler.cpp

    // Note: For security reason, this command will be registered only when
    // there are proper I2C Master write read whitelist
    if (populateI2CMasterWRWhitelist())
    {
        // Note: For security reasons, registering master write read as admin
        // privilege command, even though IPMI 2.0 specification allows it as
        // operator privilege.
        ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnApp,
                              ipmi::app::cmdMasterWriteRead,
                              ipmi::Privilege::Admin, ipmiMasterWriteRead);
    }

Also keep in mind that IPMI specification uses only 3 bits in command for I2C bus encoding. This means that it is not possible to access I2C busses with a bus number higher than 7 (i2c-7).

There is a solution that can be used to use bus numbers higher than 7. This goes beyond the IPMI standard, so it probably wouldn't make it upstream in OpenBMC. But you can use this extension in your designs:

47821: Master Write-Read: Extend bus ID. | https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-host-ipmid/+/47821

In this case 7 higher bits in the first byte of Master Write-Read IPMI command are used to encode I2C bus. Therefore you can encode I2C busses 0..127. This is more than enough for typical design.

In case you are using this custom extension recompile programs with the EXTENDED_BUS_ID define:

make clean
make CFLAGS=-DEXTENDED_BUS_ID

About

i2c-tools like utilities to work with devices under I2C busses behind BMC

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published