The components I worked with include:-
- A 840 tie-point solderless breadboard
- An Arduino Nano board
- A 16x2 LCD display
- An I2C module for interfacing the LCD display with the Arduino
- DHT11 basic temperature-humidity sensor
- HC-SR04 Ultrasonic Sensor
The above setup is powered by a USB connection.
The libraries on the Arduino IDE that I worked with while making the source code include:-
- LiquidCrystal_I2C.h
- NewPing.h
- Adafruit_Sensor.h
- DHT.h
The source code was uploaded to the Arduino Nano board using a USB connection.