Skip to content

aswinpajayan/wifi-DSO-module

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

34 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ScopeUI

small gtk + app to plot data recieved over wifi

Abstract

The project aims at creating wireless DSO module. Which will sample and the analog voltage levels with a TivaC development board and send the data over a wifi link using CC3100 addon board . This particular repository contains the code for the sender . All the details of the project (both reciever and sender side ) is given in Project Report

the code is written entirely in C.

The program is multithreaded to address any dead lock issue. Cairo library is used for drawing ui Please read report/ee712_project_report

Dependencies

    Its recommeded to use Code Composter Studio for editing and building the code . You can download it from [CCS download page](http://software-dl.ti.com/ccs/esd/documents/ccs_downloads.html). Please note there are additional steps to be followed in case of linux install ( These are given in the above web page)

Tivaware 	[TivaC SDK download page](http://software-dl.ti.com/tiva-c/SW-TM4C/latest/index_FDS.html) 
CC3100 SDK      [CC3100 SDK download page](http://www.ti.com/tool/download/CC3100SDK)

You can install the packages in windows after that you can simply copy paste the files to any linux machine. For instance one can install them
in wine and copy the files to ccs install path. After installation open the getting_started_with_wireless_ap project in CC3100 SDK /platform_examples 
directory and replace the three files in this project root (main.c sl_common.h and tm4c123gh6pm_startup_ccs.c). Build the project and flash the code . 
You need to set appropriate server ip and port in the project . Follow instructions in the project report . If you are using Linux to build the code, make sure to check all the SDK paths you might have to change the file path seperator from \ to / . Also check the SDK root .  

code for reciever (linux machine) is available at ScopeUI project

Building and running the SCOPEUI project

use the make file provided in the project root

make 		- for building the project

make run 	- to launch the ui 

click on the connect button . now the ui can start recieving UDP packets . You will have to get the ip address of the machine and update it on the sender 

Project members

1. Ananda Kundu 
2. Sunny Mehtha 
3. Aswin P Ajayan 

Releases

No releases published

Packages

No packages published

Languages