nrf52-dfu

Nordic nRF52 firmware update example from secondary MPU

For details, see our blog post: https://blog.classycode.com/updating-the-firmware-on-an-nrf52-from-another-microcontroller-b513080dc0cd

Step by step instructions

1 - Provide the SDK and toolchain in the root directory

• sdk/nRF5_SDK_15.2.0_9412b96
• toolchain/gcc-arm-none-eabi-7-2018-q2-update

The nRF52 SDK is available on the Nordic web site: https://www.nordicsemi.com/Software-and-tools/Software/nRF5-SDK/Download

To download the ARM toolchain, visit the ARM developer web site: https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads

Patch the SDK:

$ patch -p0 < nrfx_uart.patch

Install the uECC library:

$ pushd sdk/nRF5_SDK_15.2.0_9412b96/external/micro-ecc
$ export GNU_INSTALL_ROOT="$PWD/../../../../toolchain/gcc-arm-none-eabi-7-2018-q2-update/bin/"
$ git clone https://github.com/kmackay/micro-ecc.git
$ make -C nrf52hf_armgcc/armgcc
$ make -C nrf52nf_armgcc/armgcc
$ popd

2 - Create the bootloader

$ cd 02_Bootloader
$ make clean
$ make
$ make hex
$ make flash_hex

A serial console connected to the nrf52 should now display @@BOOTLOADER

3 - Create application v1

$ cd ..
$ cd 01_Demo_App
$ make clean
$ make v1

4 - Create the DFU package, send it to the bootloader

$ cd dfu_zip
$ make clean
$ make v1
$ make dfu  <-- replace the serial device in the Makefile first!

5 - Create application v2

$ cd ..
$ cd 01_Demo_App
$ make clean
$ make v2

6 - Create the DFU package for v2

$ cd dfu_zip
$ make clean
$ make v2

7 - Create v2 DFU blobs:

$ cp app_dfu_package.zip /tmp
$ pushd /tmp
$ unzip app_dfu_package.zip
$ popd

$ cd ../..
$ cd 05_Firmware_Converter
$ gcc fwconvert.c
$ ./a.out /tmp/nrf52832_xxaa.bin dfu_firmware_bin.h gFirmwareBin
$ ./a.out /tmp/nrf52832_xxaa.dat dfu_firmware_dat.h gFirmwareDat

8 - Perform DFU with the demo host application:

$ cd ..
$ cd 04_Demo_Host_Application
$ cp ../05_Firmware_Converter/dfu_firmware_bin.h .
$ cp ../05_Firmware_Converter/dfu_firmware_dat.h .
$ make

Press the button on the target board to trigger the DFU process.

$ ./fwu "/dev/tty.usbserial-DN009NQG" 57600  <-- configure for your serial device