Skip to content
/ im282a Public

Python library for the iM282A LoRa radio module based on Semtech SX1280 transceiver.

License

Notifications You must be signed in to change notification settings

cubic3d/im282a

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

13 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

iM282A WiMOD LR BASE+ HCI Python library

This library allows communicating with iM282A Radio (LoRa/FLRC/FSK) modules using vendor specific HCI messages and the WiMOD LR BASE+ proprietary firmware.

SensorApp endpoint is not supported (an in-firmware embedded sensor example application)! Feel free to open a PR if it's needed.

Most length limitations are not enforced or validated - make sure to read the corresponding vendor documentation of the firmware and module.

Install

python -m pip install im282a

Usage Example

from im282a import *
from threading import Thread


def receiver(radio: IM282A):
    while True:
        radio.handle()


with IM282A.from_serial("/dev/ttyUSB0", timeout=1) as radio1, IM282A.from_serial("/dev/ttyUSB1", timeout=1) as radio2:
    t1 = Thread(target=receiver, args=(radio1,))
    t2 = Thread(target=receiver, args=(radio2,))
    t1.start()
    t2.start()

    radio1.send(SetRadioConfigReq(SetRadioModeReq.RadioControlNvmFlag_Ram))
    radio2.send(SetRadioConfigReq(SetRadioModeReq.RadioControlNvmFlag_Ram))

    radio1.send(SendConfirmedDataReq(0x10, 0x1234, b"Test message!"))
    
    t1.join()
    t2.join()
HciMessage:
 Endpoint ID: 3 (radio_link)
 Message ID: 10 (SendConfirmedDataRsp)
 SendConfirmedDataRsp:
  Status: 0 (ok)
HciMessage:
 Endpoint ID: 3 (radio_link)
 Message ID: 14 (ConfirmedDataTXInd)
 ConfirmedDataTXInd:
  Status: 0 (ok)
  TXEventCounter: 21
  RFMessageAirtime: 497 ms
HciMessage:
 Endpoint ID: 3 (radio_link)
 Message ID: 12 (ConfirmedDataRXInd)
 ConfirmedDataRXInd:
  Status:
   Extended: True
   Decrypted: False
   DecryptionError: False
   Encrypted: False
  DstGroupAddress: 0x10
  DstDeviceAddress: 0x1234
  SrcGroupAddress: 0x10
  SrcDeviceAddress: 0x1234
  Payload: 54657374206d65737361676521 (Test message!)
  Rssi: -64 dBm
  Snr: 7 dB
  RXTime: 2021-09-03 12:54:08
HciMessage:
 Endpoint ID: 3 (radio_link)
 Message ID: 20 (AckTXInd)
 AckTXInd:
  Status: 0 (ok)
  TXEventCounter: 3
  RFMessageAirtime: 346 ms
HciMessage:
 Endpoint ID: 3 (radio_link)
 Message ID: 16 (AckRXInd)
 AckRXInd:
  Status:
   Extended: True
   Decrypted: False
   DecryptionError: False
   Encrypted: False
  DstGroupAddress: 0x10
  DstDeviceAddress: 0x1234
  SrcGroupAddress: 0x10
  SrcDeviceAddress: 0x1234
  Payload:  ()
  Rssi: -60 dBm
  Snr: 7 dB
  RXTime: 2021-09-03 03:54:09

How to use (rough overview)

  • IM282A(<serial_device>, [baud_rate], [timeout_s]) will open a serial device using the SLIP protocol. Timeout will affect reading with instance.handle()
  • instance.send(<message>) is used to send messages derived from the HciMessage class.
  • instance.register_handler(<endpoint_id>, <message_id>, <function>) registers a callback function for a specific endpoint/message combination. Multiple functions can be registered per endpoint/message and are called during instance.receive() sequentially. The function receives a data: bytes argument which has the endpoint and message IDs already stripped and can be consumed by message classes like ping_response = PingRsp.from_bytes(data).
  • instance.default_handler will handle all messages that are not handled by a callback function (default handler prints the hex bytes on stdout). The function receives two arguments: head: bytes, data: bytes. head contains the endpoint and message IDs to be consumed by HciMessage and data the rest for the resulting message class. See the example above.

Contribution

Any help is appreciated, especially on documentation, tests or the API itself. Feel free to open issues or PRs.

About

Python library for the iM282A LoRa radio module based on Semtech SX1280 transceiver.

Topics

Resources

License

Stars

Watchers

Forks

Languages