Skip to content

Digital Sound Level Meter Gm1356 USB driver for Linux

Notifications You must be signed in to change notification settings

dobra-noc/gm1356

Repository files navigation

GM1356 for Linux

Description

This driver was written for Digital Sound Level Meter with USB (type GM1356) serial number: HA:1303162 ordered from China via Aliexpress. My sonometer works with SoundLab Sound Level Meter v. 1.0.0.20, build 2016-07-20 delivered by Benetech Poland (thank you very much for this). I was trying to run it with SoundLab downloaded from Bogen website, but it couldn't connect to the device. It means my driver may not work with some GM1356 devices.

Benetech GM1356

Installation

First make sure you have ruby interpreter installed. Then run:

gem install gm1356

Now make sure that users have access to your device. In my case I had to create /etc/udev/rules.d/90-usbpermission.rules with such content:

SUBSYSTEMS=="usb",ATTRS{idProduct}=="74e3",ATTRS{idVendor}=="64bd",GROUP="users",MODE="0666"

Then run:

sudo udevadm control --reload

And after all reconnect your device if it was already connected.

Usage

If you want to print real time data from your sonometer, run:

gm1356

For more options:

gm1356 --help

Protocol

I used Wireshark with USBPcap to sniff communication between my device and SoundLab on Windows in order to understend the protocol. Protocol is described in PROTOCOL.md.

Supported functionalities

  • receiving real time data with sound level value, A/C filter, max mode, slow/fast mode and measured range
  • changing A/C filter, max mode, slow/fast mode and measured range

Unsupported functionalities

  • importing recorded data

About

Digital Sound Level Meter Gm1356 USB driver for Linux

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages