towboot

a bootloader for Multiboot kernels (version 1 and version 2) on UEFI systems

usage

towboot is a UEFI application. If you're developing an operating system or just want to create a boot medium, there are several possible options for where to place towboot and its configuration:

removable media

This is the easiest one: It works for all architectures and requires no configuration of the system. Simply place the 32-bit build at \EFI\boot\bootia32.efi, the 64-bit build at \EFI\boot\bootx64.efi and a configuration file at \towboot.toml on the ESP.

You can also use the provided towbootctl binary to do this.

towbootctl install <path_to_the_esp> --removable -- -config towboot.toml

This will parse the configuration file and copy the configuration itself, the referenced kernels and modules and towboot binaries for 32-bit and 64-bit to the target directory.

installed system

Place an appropriate build at \EFI\yourOS\towboot.efi and the configuration at \EFI\yourOS\towboot.toml on the ESP and add a boot option for \EFI\yourOS\towboot.efi -c \EFI\yourOS\towboot.toml.

towbootctl can help you a bit with this:

towbootctl install <path_to_the_esp> --name yourOS -- -config towboot.toml

(You can also configure towboot just with command line arguments instead of using a configuration file; see below.)

chainloading from another bootloader

If you already have a bootloader capable of loading UEFI applications but without support for Multiboot, you can add an entry like towboot.efi -kernel "mykernel.elf quiet" -module "initramfs.img initrd".

(You can use a configuration file instead of passing the information directly on the command line; see above.)

paths

Paths given in a configuration file or on the command line are interpreted as follows:

• absolute if they start with a volume identifier (fs?:)
• relative to the volume towboot itself is on if they start with a backslash (\)
• relative to the configuration file

Paths relative to the UEFI shell's current working directory are not supported, yet.

Paths for kernel and modules given on the commandline can't contain spaces, use a configuration file for this.

quirks

You can override some specifics of how the kernel is loaded at runtime by adding quirks. They can be configured either in the quirk key of a kernel entry (if the kernel is loaded via a configuration file) or via the -quirk command line option (if the kernel is loaded via -kernel).

Available quirks are:

• DontExitBootServices: do not exit Boot Services This starts the kernel with more privileges and less available memory. In some cases this might also display more helpful error messages.
• ForceElf: always treat the kernel as an ELF file
• ForceOverwrite: ignore the memory map when loading the kernel (This might damage your hardware!)
• KeepResolution: ignore the kernel's preferred resolution
• ModulesBelow200Mb: keep allocations for modules below 200 MB

development

If you want to compile towboot yourself, here are the instructions:

dependencies

You'll need a nightly Rust compiler. The version doesn't really matter, though 1.78.0-nightly (c67326b06 2024-03-15) definitely works. If you don't know how to install one, please take a look at rustup.rs.

To boot the disk image in a virtual machine, QEMU is recommended. You'll need OVMF for that, too, but the build script downloads it by itself.

building

cargo build --package towboot

creates a towboot.efi file inside the target folder. By default, this is a debug build for i686-unknown-uefi. You can change this by appending --release or by setting --target x86_64_unknown_uefi (for example).

Running cargo xtask build will do that and also create a disk image, so just may just want to run this. To boot the resulting image with QEMU, you can use cargo xtask run.

You can configure whether to create a debug or release build for either i686 or x86_64, whether to enable KVM or wait for a GDB to attach by specifying command line options.

You can also run towbootctl directly from the source directory (building it will also build towboot, in turn):

cargo run --package towbootctl --features binary

running the tests

The integration tests can be run with:

cargo test --package tests

project structure

This project is a Cargo workspace consisting of the multiple packages. More documentation for each of them is available by running:

cargo doc --package <package> --open

towboot

This is the actual bootloader.

towboot_config

This is a library containing the configuration structs. It is used by towboot and towbootctl.

towboot_ia32 / towboot_x64

These are dummy crates that just exists to provide the towboot binary in library form.

towbootctl

This is both a library and a command line utility that can create images, install towboot to disk, and so on.

tests

This contains the integration tests.

xtask

This contains build tooling.

contributing

This project follows the usual GitHub workflow consisting of fork, pull request and merge. If you don't have a GitHub account, you can also send patches per e-mail.