A small program to work use mpd as a MP3 / netradio controlled with 5 push buttons and an RFID-Tag.
Important notice: This library has not being actively updated in almost four years. It might not work as intended on more recent Raspberry Pi devices. You might want to take a look to the open pull-requests and forks to see other implementations and bug-fixes.
This code requires you to have SPI-Py installed from the following repository: https://github.com/lthiery/SPI-Py
git clone https://github.com/lthiery/SPI-Py.git
sudo python setup.py install
This repository includes a couple of examples showing how to read, write, and dump data from a chip. They are thoroughly commented, and should be easy to understand.
You can use this image for reference.
| Name | Pin # | Pin name | State |
|---|---|---|---|
| SDA | 24 | GPIO8 | |
| SCK | 23 | GPIO11 | |
| MOSI | 19 | GPIO10 | |
| MISO | 21 | GPIO9 | |
| IRQ | None | None | |
| GND | Any | Any Ground | |
| RST | 22 | GPIO25 | |
| 3.3V | 1 | 3V3 | |
| BUTTON_VOLUME_UP | 18 | GPIO24 | with Pullup |
| BUTTON_VOLUME_DOWN | 16 | GPIO23 | with Pullup |
| BUTTON_PAUSE | 15 | GPIO22 | with Pullup |
| BUTTON_TRACK_PREV | 11 | GPIO17 | with Pullup |
| BUTTON_TRACK_NEXT | 13 | GPIO27 | with Pullup |
To start the radio control execute the Read.py. To write a new card create a file writeCard in excution directory and put the playlist name
This code and examples are licensed under the GNU Lesser General Public License 3.0.