Skip to content

Home Assistant card for controlling the Alarmo component

Notifications You must be signed in to change notification settings

nielsfaber/alarmo-card

Repository files navigation

alarmo-card

hacs_badge

Introduction

This is a Lovelace card for Home Assistant that can be used to control your Alarmo security system.

The card works on top of the alarmo custom component. You will need it this as well.

This card is only suitable for controlling entities (of type alarm_control_panel) which are generated by the Alarmo integration, you cannot use it with any other alarm integration in HA.

Preview:

alt text

Features

The alarmo-card is similar to the Lovelace alarm panel card, but brings some extra functions.

Countdown timer

A countdown timer is displayed when the alarm is in arming or pending state. The countdown timer will show the remaining time of the configured exit / entry delay. This gives you an indication of how much time you have left for leaving the house / disarming the alarm.

Diagnostics messages

The card will give you an indication in the following conditions:

  • A wrong code (or no code) was entered.
  • The alarm could not be armed (due to one or more sensors).
  • The alarm was triggered (due to one or more sensors).

In the second and third case you will see a message in the card with the sensors that caused the issue. The state of these sensors is visible in the message, such that you have feedback in case the issue is resolved.

Arming options

When the alarm is disabled, an icon is shown in the top-right corner of the card. By clicking it a menu is revealed with the advanced arming options:

  • Skip delay: setting this option will cause the exit delay to be skipped, so arming the alarm will be effective immediately. This is practical in case you want to arm the alarm after you already left the house.
  • Bypass open sensors: this option forces the alarm to be armed. In case sensors are blocking the arming, they will be automatically bypassed (temporarily eliminated from the alarm).

The arming options are only applied on the next time you arm the alarm.

Card customization

The card allows the following customization options:

  • Increasing the size of the buttons in the card.
  • Choose which buttons for arming modes are visible.
  • Change the texts visible on the arming mode buttons and the text visible when the alarm is in this state.
  • Change the title of the alarm.

Installation

click to show installation instructions

HACS installation:

Note: Ensure you have a www folder created as in config/www or the installation will succeed but fails silently

  1. Click the Orange + button bottom right and search for Alarmo Card
  2. Click on "Install" under the new card that just popped up.

Note: Ensure to install https://github.com/nielsfaber/alarmo and add the integration in order for the card to work properly.

Manual installation

  1. Download the latest release of alarmo-card.js here and place it into www/alarmo-card.

  2. Use the GUI; Configuration -> Lovelace Dashboards -> Resources Tab to add /local/alarmo-card/alarmo-card.js?v=0, or add a reference to the card in the resources section of configuration.yaml:

resources:
  - url: /local/alarmo-card/alarmo-card.js?v=0
    type: module

Updating

click to show updating instructions

Updating via HACS: HACS should auto-remind you in the HACS tab when an update is available.

Updating manually:

Use git pull for manual installation updates.

Since most browsers will cache the Lovelace card code, you can force a refresh of the browser by editing the entry in the resources: section in ui-lovelace.yaml, by updating the version to ?v=(n+1) (where n the current value).


Configuration

For setting up the card, you need to assign the correct entity to the card. All settings regarding delay times, arming modes, code settings are automatically detected.

Example YAML configuration:

type: 'custom:alarmo-card'
entity: alarm_control_panel.alarmo

Configuration using UI mode:

  1. Go to the Lovelace page where you want to add the card
  2. Click "Edit Dashboard" on the right (under the button with the 3 dots)
  • Click the "Add card" button on the bottom
  • Choose "Custom: Alarmo Card" and pick the correct entity.

Options

Name Type Requirement Description Default
type string Required custom:alarmo-card
entity string Required Alarm_control_panel entity
name string Optional Displayed name (next to icon) (Take from entity)
keep_keypad_visible boolean Optional Keep the keypad always visible, also when no code input is required.
Only useful if numerical code is used.
false
button_scale_actions number Optional Scaling factor to apply to the size of the action buttons (between 1.0 and 2.5) 1.0
button_scale_keypad number Optional Scaling factor to apply to the size of the keypad buttons (between 1.0 and 2.5) 1.0
use_clear_icon boolean Optional Show icon (instead of text) in keypad for clearing code input.
Only useful if numerical code is used.
false
show_messages boolean Optional Show diagnostic messages in the card when alarm is triggered or cannot be armed. true
show_ready_indicator boolean Optional Adds ready/not ready indicators to the arm mode buttons. true
show_bypassed_sensors boolean Optional Show a warning message when the alarm is armed with bypassed sensors. true
states object Optional Customize the display of states in the card.
See state configuration.

State configuration

State configuration allows users to modify the displayed texts and buttons (where applicable) in the card corresponding to certain states.

Note that the alarm entity may not support all armed_xxx states. States which are not supported will not show up in the card and cannot be configured.

Name Type Applicable states Description Default
hide boolean armed_away
armed_home
armed_night
armed_vacation
armed_custom_bypass
Hides the button corresponding to the state. false
button_label string disarmed
armed_away
armed_home
armed_night
armed_vacation
armed_custom_bypass
Overwrites the text on the button.
Only useful if the button is not hidden.
(Use translation from HA)
state_label string disarmed
triggered
arming
pending
armed_away
armed_home
armed_night
armed_vacation
armed_custom_bypass
Overwrites the text displayed in the card when the alarm is in this state. (Use translation from HA)

Example of using state configuration

The example below hides the armed_home button (although the alarm supports it), and renames the armed_away / disarmed options.

type: custom:alarmo-card
entity: alarm_control_panel.alarmo
states:
  armed_away:
    hide: false
    button_label: "Turn on"
    state_label: "Enabled"
  armed_home:
    hide: true
  disarmed:
    hide: false
    button_label: "Turn off"
    state_label: "Disabled"
# ... rest of card config

Result:

example result


Say thank you

If you want to make donation as appreciation of my work, you can do so via PayPal or buy me a coffee. Thank you!