Skip to content

nagios check with perfdata for technicolor tc4400 cable modems

Notifications You must be signed in to change notification settings

philfry/check_tc4400

Repository files navigation

NAME

check_tc4400

SYNOPSIS

check_tc4400 <OPTIONS>

OPTIONS

  • H,hostname HOSTNAME

    Hostname or ip address of your tc4400 modem.

  • u,username username

    Username to authenticate with to the modem's webinterface.

  • p,password password

    Password to authenticate with to the modem's webinterface.

  • r,read filename

    Read data from file (usually for debugging purposes).

  • i,ignore {docsis30|docsis31}

    Do not check thresholds for {docsis30|docsis31}. Collect perfdata though. Useful when your line performance is really bad but your modem works nonetheless, or you're connected both with docsis 3.0 and 3.1 but the modem only uses either of them.

  • s,startle

    Startle the modem by sending an unauthorized dummy request prior to the "real" request for data. Use this workaround if your modem randomly times out with check_tc4400.

DESCRIPTION

This script connects to the TC4400 webinterface and parses the connection status page.

It warns or returns a critical state if:

- Connectivity State is not "OK"
- Boot State is not "OK"
- Configuration File is not "OK"
- Security is not "Enabled"
- downstream channel is not "Locked"
- downstream channel signal/noise ratio is below a predefined value
- downstream channel transmission level is odd
- upstream channel transmission level is odd

see 20180617_Pegelwerte.pdf for thresholds.

AUTHOR

Philippe Kueck <projects at unixadm dot org>

EXAMPLE

screenshot