SDR Docker Base Image

Purpose

Provide a basic image, with all normal packages common to all installs of mikenye, fredclausen, or kx1t SDR docker images, to reduce download time and disk space usage for users.

Adding containers

1. Create your new docker file
2. Update github actions
3. Update the Tags section
4. Update the Projects and Tag Tree section

Tags

Tag	Extends	Included Packages
base	-	s6-overlay (via mikenye/deploy-s6-overlay), mikenye/docker-healthchecks-framework, bc, ca-certificates, curl, gawk, ncat, net-tools, procps, socat
acars-decoder	rtlsdr	libacars and all prerequisites for full functionality: (zlib1g, libxml2, libsqlite3)
python	base	python3, python3-pip, python3-setuptools, python3-wheel
readsb-full	rtlsdr	Contains the latest dev branch of Mictronics/readsb-protobuf and all prerequisites for full functionality: (bladeRF, bladeRF FPGA images, libiio (for PlutoSDR), libad9361-iio (for PlutoSDR))
readsb-netonly	base	Contains the latest dev branch of Mictronics/readsb-protobuf intended to operate in network only mode.
wreadsb	base	Contains the latest dev branch of wiedehopf's fork of readsb with rtl-sdr & libusb.
rtlsdr	base	Contains the latest tagged release of rtl-sdr, and prerequisites (eg: libusb)
soapyrtlsdr	rtlsdr	Contains the latest tagged release of SoapySDR and SoapyRTLSDR, and prerequisites (python3, python3-pip, python3-setuptools, python3-wheel)
dump978-full	soapyrtlsdr	Contains the latest tagged release of flightaware/dump978, and prerequisites (various boost libraries)
qemu	base	Contains qemu-user-static binaries

Using

Simply add FROM ghcr.io/sdr-enthusiasts/docker-baseimage:<tag> at the top of your Dockerfile, replacing <tag> with one of the tags above.

The base image provides an [ENTRYPOINT] for starting the container so unless you have a specific reason to change this you do not have to provide an [ENTRYPOINT] in your Dockerfile.

Example:

FROM ghcr.io/sdr-enthusiasts/docker-baseimage:rtlsdr
RUN ...

Tag-specific Notes

readsb-full

• The readsb webapp and configuration files have been included in the image (see /usr/share/readsb/html and /etc/lighttpd/conf-available), however lighttpd has not been installed or configured. You will need to do this if you want this functionality in your image.
• The collectd configuration files have been included in the image (see /etc/collectd/collectd.conf.d and /usr/share/readsb/graphs), however collectd/rrdtool have not been installed or configured. You will need to do this if you want this functionality in your image.
• The installed version of readsb's protobuf protocol file is located at: /opt/readsb-protobuf, should you need this in your image.
• bladeRF FPGA firmware images are located at: /usr/share/Nuand/bladeRF

Projects and Tag Tree

Tag	Sub-tags Using	Up-Stream Projects Using
base	ALL	sdr-enthusiasts/acars_router,sdr-enthusiasts/airspy-adsb, sdr-enthusiasts/docker-radarbox, sdr-enthusiasts/docker-adsbhub, sdr-enthusiasts/docker-opensky-network, sdr-enthusiasts/docker-rtlsdrairband
acars-decoder	-	sdr-enthusiasts/docker-acarsdec, sdr-enthusiasts/docker-dumpvdl2, sdr-enthusiasts/docker-vdlm2dec
python	-	sdr-enthusiasts/docker-acarshub, sdr-enthusiasts/docker-adsbexchange, kx1t/docker-planefence, sdr-enthusiasts/docker-radarvirtuel, sdr-enthusiasts/docker-reversewebproxy, kx1t/docker-raspberry-noaa-v2
rtlsdr	acars-decoder, readsb-full, soapyrtlsdr, wreadsb	sdr-enthusiasts/acars-oxide
readsb-full	-	sdr-enthusiasts/docker-readsb-protobuf
readsb-netonly	-	-
soapyrtlsdr	dump978-full	-
dump978-full	-	sdr-enthusiasts/docker-piaware, sdr-enthusiasts/docker-dump978
wreadsb	-	sdr-enthusiasts/docker-tar1090
qemu	-	sdr-enthusiasts/docker-flightradar24, sdr-enthusiasts/docker-planefinder