Skip to content

sparkfun/SparkFun_Simultaneous_RFID_Tag_Reader_Library

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

68 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

SparkFun Simultaneous RFID Tag Reader Library

SparkFun Simultaneous RFID Tag Reader - NANO M6E

SparkFun Simultaneous RFID Tag Reader - NANO M6E (SEN-14066)

This is a powerful shield capable of reading multiple RFID tags at the same time. It can also write to tags. Works with UHF Gen2 RFID tags.

Thanks to:

Note - Most examples make use of SoftwareSerial, which is not included in all platform cores. If you run into compilation errors due to this, you'll need to install an appropriate library for your platform (eg. ESPSoftwareSerial for ESP32), or replace softSerial in the examples with something that works for your platform (eg. Serial2 for ESP32 or Serial5 for teensy, see Advanced Example1).

Repository Contents

  • /examples - Example sketches for the library (.ino). Run these from the Arduino IDE.
  • /src - Source files for the library (.cpp, .h).
  • keywords.txt - Keywords from this library that will be highlighted in the Arduino IDE.
  • library.properties - General library properties for the Arduino package manager.

Documentation

License Information

This product is open source!

The code is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round!

Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.

Distributed as-is; no warranty is given.

  • Your friends at SparkFun.