Skip to content

tinkersprojects/RGB_LED

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

26 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

RGB_LED Library

https://tinkersprojects.com/

RGB LEDs are used everywhere, in many different products and devices. This Arduino library is to the control RGB LED's colour and fading between colours. Almost every setting can be controlled though this library to control the RGB LEDs. The library contains preset colours and fuctions to make it easier to construct your RGB LED project.

IMAGE ALT TEXT HERE IMAGE ALT TEXT HERE IMAGE ALT TEXT HERE

circuit

Any PWM pins can be used for and LED/LED color. Below is and example for pin 9 = red, pin 10 = green and pin 11 = blue.

RGB_LED LED(9,10,11);

circuit

Functions

SETUP

RGB_LED(byte pinR,byte pinG,byte pinB)

This is the setup for the class, this is where the pins are declared for the RGB LED. pinR, pinG and pinB is where the PWM pin numbers are placed.

SET

void set(byte Rvalue,byte Gvalue,byte Bvalue)

This function sets a RGB colour. It will stop a fade to be the set color. Rvalue, Gvalue and Bvalue are used to set the RGB colour. These RGB Byte variables are the values between 0 and 255. 0 is the LED completely off, 255 is the LED Completely on and all values between is a PWM percent.

void setSpeed(unsigned long speedValue)

This Functions sets the speed of fades and the speed of colour functions. The speedValue is in milliseconds and is used from the start to the finish of the fade.

void setPercentFade(float FadeValue)

This function set the where the fade is. The FadeValue is a between 0 and 1. If the FadeValue is set to be 0.5 at 1000 speed the fade would continue from 50%.

void fadeTo(byte Rvalue,byte Gvalue,byte Bvalue,unsigned long speedValue)

This function is used to fade from the current set colour to a RGB colour at a speed. Rvalue, Gvalue and Bvalue are used to set the RGB colour and speedValue is used to set the fade speed. These Rvalue, Gvalue and Bvalue Byte variables are the values between 0 and 255. 0 is the LED completely off, 255 is the LED Completely on and all values between is a PWM percent. The speedValue is in milliseconds and is used from the start to the finish of the fade.

void setFunction(byte functionValue)

This function is used to select a LED colour function. All the LED's colour functions are listed below under Colour Functions

void setRandom()

This will make the LED fade to a random colour with a random fade speed.

void setColour(byte colour)

This will set the LED to a selected colour. The colour can be chosen from the colours list below.

void fadeToColour(byte colour,unsigned long speedValue)

This will make the LED fade to a selected colour with a selected fade speed. The colour can be chosen from the colours list below. The speedValue is in milliseconds and is used from the start to the finish of the fade.

GET

unsigned long getSpeed()

This will return the current set speed in milliseconds.

float getPercentFade()

This will return the current fade percent of completion.

byte getFunction()

This will return the current set function.

byte getCurrentRValue()

This will return the current Red value.

byte getCurrentGValue()

This will return the current Green value.

byte getCurrentBValue()

This will return the current Blue value.

int getFunctionCount()

This will return the current functions step count.

CHECKING

boolean hasFinished()

This checks if the fade as finished and returns true when finished

COMMANDS

void run()

This function is required to run as much as possible. This function runs the calculates and the controls the PWM for the LED.

void stop()

This will stop all current fading and freeze the colour.

void delay(unsigned long delayValue)

This function is used in replacement of Delay(). This delay will continue to process the run() function.

Colours

  • Black
  • White
  • Red
  • Green
  • Blue
  • Yellow
  • Purple
  • Aqua

Colour Functions

  • Random: this randomly fades betweens random colours at random speeds.
  • Solid: this stays at a set colour.
  • Fade: this fades betweens Red, Green and blue colours at a set speed.
  • FadeRandom: this fades betweens random colours at a set speeds.
  • Step1: this steps betweens Red, Green and blue colours at a set speed.
  • Step2: this steps betweens all colours at a set speed.
  • StepRandom: this steps betweens random colours at a set speeds.

Example

Example 1: Fade

#include <RGB_LED.h>

RGB_LED LED(9,10,11);

void setup() 
{
  LED.setFunction(Fade);
}

void loop() 
{
   LED.run();
}

Example 2: Two LEDs

#include <RGB_LED.h>

RGB_LED LED1(9,10,11);
RGB_LED LED2(3,4,5);

void setup() 
{
  LED1.setFunction(Fade);
  LED2.setFunction(Step);
}

void loop() 
{
   LED1.run();
   LED2.run();
}

Example 3: Set Speed

#include <RGB_LED.h>

#define upButtonPin 4
#define downButtonPin 5

unsigned int speed = 1000;

RGB_LED LED(9,10,11);

void setup() 
{
  pinMode(upButtonPin,INPUT);
  pinMode(downButtonPin,INPUT);
  LED.setFunction(Fade);
}

void loop() 
{
   LED.run();

   if(digitalRead(downButtonPin)==HIGH && speed<100)
   {
      speed--;
      LED.setSpeed(speed);
      LED.delay(10);
   }
   if(digitalRead(upButtonPin)==HIGH && speed>20000)
   {
      speed++;
      LED.setSpeed(speed);
      LED.delay(10);
   }
}

Releases

No releases published

Packages

No packages published

Languages