uhppote-simulator

Software simulator for access control systems based on the UHPPOTE UT0311-L0x TCP/IP Wiegand access control boards.

Supported operating systems:

• Linux
• MacOS
• Windows
• ARM/ARM7 (RaspberryPi)

---

Contents

• Release Notes
• Installation
  • Docker
  • Building from source
• Supported functions
• REST API
  • swipe-card
  • supervisor-passcode
  • open-door
  • close-door
  • press-button
  • list-controllers
  • create-controller
  • delete-controller
• Notes
  • put-card
  • restore-default-parameters
  • passcode

---

Release Notes

Current release

v0.8.8 - 2024-03-27

1. restore-default-parameters command emulation.
2. Python REST API CLI client implementation.
3. Added public Docker image to ghcr.io.
4. Bumped Go version to 1.22
5. Updated README with REST API.
6. Updated REST API OpenAPI specification.
7. Fixed uninitialised map in controller doors deserialization.

Installation

Docker

A public Docker image is published to ghcr.io. The image:

• includes a getting started sample controller\
• is configured to store emulated controllers in /usr/local/etc/uhppoted/simulator

docker compose

A sample Docker compose configuration is provided in the docker/compose folder.

To run the example, download and extract the zipped scripts and supporting files into folder of your choice and then:

cd <compose folder>
docker compose up

The emulated controllers can be managed using the REST API.

docker run

To start a simulator using Docker run:

docker pull ghcr.io/uhppoted/simulator:latest
docker run --detach --publish 8000:8000 --publish 60000:60000/udp --name simulator \
           --mount source=uhppoted,target=/usr/local/etc/uhppoted \
           --rm ghcr.io/uhppoted/simulator

The emulated controllers can be managed using the REST API REST API.

docker build

For inclusion in a Dockerfile:

FROM ghcr.io/uhppoted/simulator:latest

Building from source

Assuming you have Go and make installed:

git clone https://github.com/uhppoted/uhppote-simulator.git
cd uhppote-simulator
make build

If you prefer not to use make:

git clone https://github.com/uhppoted/uhppote-simulator.git
cd uhppote-simulator
mkdir bin
go build -trimpath -o bin ./...

uhppote-simulator

Supported uhppote functions:

• FindDevices
• FindDevice
• SetAddress
• GetListener
• SetListener
• GetTime
• SetTime
• GetDoorControlState
• SetDoorControlState
• RecordSpecialEvents
• GetStatus
• GetCards
• GetCardById
• GetCardByIndex
• PutCard
• DeleteCard
• DeleteCards
• GetTimeProfile
• SetTimeProfile
• ClearTimeProfiles
• ClearTaskList
• AddTask
• RefreshTaskList
• GetEvent
• GetEventIndex
• SetEventIndex
• OpenDoor
• SetPCControl
• SetInterlock
• ActivateAccessKeypads
• RestoreDefaultParameters
• Listen

Usage: uhppote-simulator <command> --devices=<dir>

Defaults to 'run' unless one of the commands below is specified:

• help
• version

Supported options:

• --bind
• --devices
• --debug

REST API

The simulator provides a REST API to simulate user actions and manage controllers:

• swipe card
• supervisor passcode
• open door
• close door
• press button
• list controllers
• create controller
• delete controller

The actions may be invoked:

• from the command line using curl
• using the REST.py script
• using one of the many Postman-like tools available. Postman scripts can be found in the scripts folder
• using the Swagger Editor with the OpenAPI YAML file.

The default port is 8000.

swipe-card

Simulates a card swipe with optional keypad code.

URL: `http://localhost:8000/uhppote/simulator/{controller}/swipe`
Method: POST
Request:
{
    "door": <door>,
    "card-number: <card>,
    "direction": [1|2],
    "PIN": <passcode>
}

controller   controller serial number e.g. 405419896
door         door number [1..4] e.g. 3
direction    1: IN, 2: OUT
PIN          (optional) PIN code for keypad reader

swipe:

curl -X POST "http://127.0.0.1:8000/uhppote/simulator/405419896/swipe" -H "accept: application/json" -H "Content-Type: application/json" -d '{"door":1,"card-number":10058400,"direction":1,"PIN":1357}'

swipe-in:

curl -X POST "http://127.0.0.1:8000/uhppote/simulator/405419896/swipe" -H "accept: application/json" -H "Content-Type: application/json" -d '{"door":1,"card-number":10058400,"direction":1,"PIN":1357}'

swipe-out:

curl -X POST "http://127.0.0.1:8000/uhppote/simulator/405419896/swipe" -H "accept: application/json" -H "Content-Type: application/json" -d '{"door":1,"card-number":10058400,"direction":2,"PIN":1357}'

supervisor-passcode

Simulates a supervisor passcode entry on a keypad.

URL: `http://localhost:8000/uhppote/simulator/{controller}/code`
Method: POST
Request:
{
    "door": <door>,
    "PIN": <passcode>
}

controller   controller serial number e.g. 405419896
door         door number [1..4] e.g. 3
passcode     supervisor passcode

curl -X POST "http://127.0.0.1:8000/uhppote/simulator/405419896/code" -H "accept: application/json" -H "Content-Type: application/json" -d '{"door":1,"passcode":1357}'

open-door

Simulates opening a door - the door must be unlocked (e.g. by a card swipe or button press or supervisor passcode) to open. A door open event will generated if the door was closed.

URL: `http://localhost:8000/uhppote/simulator/{controller}/door/{door}`
Method: POST
Request:
{
    "action": "open",
}

controller   controller serial number e.g. 405419896
door         door number [1..4] e.g. 3
action       open

curl -X POST "http://127.0.0.1:8000/uhppote/simulator/405419896/door/1" -H "accept: application/json" -H "Content-Type: application/json" -d '{"action":"open"}'

close-door

Simulates closing a door - a door closed event will be generated if the door was open.

URL: `http://localhost:8000/uhppote/simulator/{controller}/door/{door}`
Method: POST
Request:
{
    "action": "close",
}

controller   controller serial number e.g. 405419896
door         door number [1..4] e.g. 3
action       close

curl -X POST "http://127.0.0.1:8000/uhppote/simulator/405419896/door/1" -H "accept: application/json" -H "Content-Type: application/json" -d '{"action":"close"}'

press-button

Simulates pressing the 'door open' button - a button pressed event will be generated if the button was not already pressed.

URL: `http://localhost:8000/uhppote/simulator/{controller}/door/{door}`
Method: POST
Request:
{
    "action": "button",
    "duration": 10
}

controller   controller serial number e.g. 405419896
door         door number [1..4] e.g. 3
action       button
duration     seconds to press the button e.g. 10

curl -X POST "http://127.0.0.1:8000/uhppote/simulator/405419896/door/1" -H "accept: application/json" -H "Content-Type: application/json" -d '{"action":"button", "duration":10}'

list-controllers

Lists the configured controllers.

URL: `http://localhost:8000/uhppote/simulator`
Method: GET

curl -X GET "http://127.0.0.1:8000/uhppote/simulator" -H "accept: application/json"

create-controller

Adds a new controller to the simulator.

URL: `http://localhost:8000/uhppote/simulator`
Method: POST
Request:
{
    "device-id": <controller>,
    "device-type": <manufacturer-code>,
    "compressed": [true|false]
}

controller          controller serial number e.g. 405419896
manufacturer-code   UT0311-L02 for a 2 door controller, UT0311-L04 for a 4 door controller
compressed          store controller in compressed (true) or human-readable form (false)

curl -X POST "http://127.0.0.1:8000/uhppote/simulator" -H "accept: */*" -H "Content-Type: application/json" -d '{"device-id":405419896,"device-type":"UT0311-L04","compressed":false}'

delete-controller

Delets a controller from the simulator.

URL: `http://localhost:8000/uhppote/simulator/<controller>`
Method: DELETE

controller   controller serial number e.g. 405419896

curl -X DELETE "http://127.0.0.1:8000/uhppote/simulator/405419896" -H "accept: */*"

Postman

Python

NOTES

put-card

The UHPPOTE access controller has a weird behaviour around the PIN field. According to the SDK documentation, valid PINs are in the range 0 to 999999. However the controller will accept a PIN number out of that range and only keep the lower 7 nibbles of the 32-bit unsigned value. e.g:

PIN	Hex value	Stored as (hex)	Retrieved as (hex)	Retrieved as (decimal)
0	0x000000	0x000000	0x000000	0
999999	0x0f423f	0x0f423f	0x0f423f	999999
1000000	0x0f4240	0x000000	0x000000	0
1000001	0x0f4241	0x000000	0x000000	0
1048576	0x100000	0x000000	0x000000	0
1048577	0x100001	0x000000	0x000001	1
1999999	0x1E847F	0x0E847F	0x000001	951423

Note that by design, the simulator does not emulate this behaviour, on the grounds that it is probably a version specific bug.

restore-default-parameters

restore-default-parameters has (for practical reasons) NOT been validated against an actual controller. Resetting the simulator:

• clears the internal controller IPv4 address, netmask and gateway
• clears the event listener address
• clears all events
• deletes all cards
• sets all doors to controlled mode and 5 seconds delay
• clears all door passcodes

passcode

1. If a supervisor passcode is entered for a door that is normally closed, the UHPPOTE controller will unlock the door and then immediately relock it. This seems anomalous and in this case the simulator unlocks the door on the assumption that the supervisor code is intended to be an override.

Events

tl;dr; The UHPPOTE controller does not 'rollover' when the onboard event store is filled.

From experimentation, it appears that the UHPPOTE controller has an event store for approximately 200 000 events (possibly varies varies with model/version). On filling the event buffer the controller seems to discard a chunk of about 2048 events from the start of the event buffer to make space for new events. The event index continues to increment monotonically.