Light Controller for Raspberry Pi

This project is an RGB light controller designed to work with an RGB LED strip and a Raspberry Pi. You can customize and control the colors of the LED strip by adjusting the red, green, and blue values through the GPIO pins of the Raspberry Pi.

⚠ Important: Only with Raspberry PI support

👷‍♂️ Requirements

• Raspberry Pi
• RGB LED strip
• Wiring connections
• Python 3.x installed on the Raspberry Pi

⚙ Pin Configuration

• Pin 40: Red
• Pin 37: Green
• Pin 38: Blue

Make sure to connect the LED strip correctly to the corresponding pins on the Raspberry Pi.

📦 Installation

1. Clone this repository on your Raspberry Pi:

git clone http://github.com/zitrocode/light_controller

2. Navigate to the project directory:

cd light_controller

🚀 Usage

1. Run the main script:

python ./main.py

Note: Ensure you have Tkinter installed on your Raspberry Pi to run the graphical interface.

🤝 Contributions

Contributions are welcome! If you encounter any issues or have improvements, please create an issue or a pull request.

📝 License

This project is licensed under the MIT License